";s:4:"text";s:1215:" One stops at the side of the metal base and one extends into the tip, so be sure all contacts with the bulb base touch. Tape the second piece of wire to the bulb, then finish by connecting the other end of the wire to the positive side of the battery to make the bulb light up. Connect the opposite ends of the two wires from the last LED light holder to the battery that is going to power your LED lights. Make the light bulb light up with the battery by touching the bottom tip of the bulb to the positive or bumpy end of the battery. The LED … If you want to make a light using batteries, start by stripping 1-2 inches off of both ends of 2 pieces of wire.
Then, use electrical tape to attach a piece of wire to the negative end of the battery and the other end to the lightbulb.
Connect the opposite ends of the two loose short wires from the penultimate LED light holder and one end of the two long strips of wire to the terminals of the last LED light holder.